If you find a
Cheaper Quote,
Send it to us
and we will
beat that price!
GUARANTEED!

These Vehicle Graphics look freakin' AWESOME on ANY vehicle. They are made of the exact same vinyl as the the professional decals on race cars and use by professional car shops. They are car wash safe and will last a minimum 5 years. They can be clear coated to remain a permanent part of your vehicle. Please read our FAQ section for tips.

Each item contains a set of 2 decals,
one for each side of the vehicle (yes.... is reversed)

Need a custom decal? Web address decals, car clubs, banners? Whether you are an artist, have a picture of what you want, or just a good imagination.......we can help! We can do ANYTHING you want in ANY color! Just tell us the idea of your dream graphic, and we will do our best to design it for you..... We Are The Graphic Gods!

IMPORTANT NOTE REGARDING GRAPHIC SIZE/DIMENSIONS
When selecting your graphics size in the drop down menu use the "LENGTH" as your
main size choice, it will be accurate for the length of your decal. The "HEIGHT"
dimension will vary depending on the graphic design, some designs are smaller in
height than others, the height figures are average measurements. Your graphic will
resemble the one in the sample image of the graphic you selected. If you have a
specific size/dimension in mind just let us know by entering the exact dimensions in the "DIRECTIONS" field, we can adjust/edit any dimension to fit your needs.

• How should I prepare the surface for the decal?
  Please read these instructions all the way through before starting your application. The surface must be clean, and free of all oils, waxes and dirt. If decal is to be applied to GLASS, use Windex or a comparable cleaner to clean the glass. If you use RainX, try Formula 409 to remove it. On painted surfaces wipe with a wax remover or alcohol if applying on freshly waxed paint. These Decals come to you in three layers. The top layer is called the Transfer Tape. It looks somewhat like regular masking tape. The middle layer is the actual Decal. The bottom layer is a Backing Paper treated with a release agent.
  
  
  
• Installing using the WET Method....
  Mix a gallon or so of water with a few drops of dishwashing liquid. Use a spray bottle and wet the ENTIRE area where the decal is to be applied.
  
  Trim away the transfer tape so that the tape is about (within 1/2") border, of your Decal. Remove the backing paper and place the Decal, still attached to the transfer tape, to the thoroughly wetted surface. The decal can then be gently moved and repositioned correctly. Your Decal will slide on the thin film of solution trapped between the vinyl decal and the surface. If you are doing a windshield decal and need to curve the letters, cut the transfer tape with a pair of scissors between the letters about 3/4 of the way from the top of the Decal and position the letters where needed. DO NOT cut all the way through as this will mess up your spacing between the letters. When the decal is in the final location, use a small squeegee or drivers license to squeeze the water and detergent solution out from under the decal. The transfer tape will protect the decal during this process.
  
  CAUTION
  
  Be sure to squeegee as much solution as possible from under the decal. Take your time, because if not enough solution is removed from under the decal, the Decal will not adhere to the surface enough to allow the easy removal of the transfer tape. Although a squeegee is the recommended tool, the water can also be removed by using your fingers, or a soft cloth. When through with the squeegee, the transfer tape can be carefully removed. Work the decal with your fingers, and a soft, absorbent cloth around the edges and corners to remove any remaining solution. Warm weather is best for this application. If there are bubbles present under the decal that cannot be removed by working them to the edge of the decal with your fingers, then a small pin or needle can be used to puncture the decal at the bubble, to remove the air. A small pin hole will not be seen after the air bubble has been worked out with the fingers.
  
  
  
  
• How should I care for my decal?
  In colder climates, decals on windows of vehicles can be damaged by the scraping of frost or ice from the windows. Mild window cleaner may be used to clean the windows without damage to the decal.
  
  On painted surfaces of vehicles, care must be taken when waxing. Wax will build up around the edges of the decal, and will need to be removed. Use a soft cloth, and take your time, and be gentle. DON'T DO. A brush, for example will force the wax underneath the edge of the decal, and the decal will begin to peel. Your Decal will not be damaged by normal use of car wash products, or water. Although the decals will withstand pressure washers and car washes, these will reduce the life and appearance of your Decal. The decals will not last forever, but will give you many years of enjoyment if taken care of properly.
  
  
  
  
• How do I remove my decal?
  On glass surfaces, with temperatures between 70 and 80 degrees, a razor blade scraper can be used. Decals can be removed from painted surfaces by using a heat gun or hair dryer to warm the decal to the point to where it peels off easily.
  
  THE APPLICATION OF VINYL DECALS REQUIRES A DEGREE OF DEXTERITY AND CONCENTRATION. IF YOU FEEL THAT YOU CANNOT APPLY THE DECAL YOURSELF, ANY AUTO DETAILER, OR BODY SHOP CAN APPLY IT FOR YOU. WE CANNOT BE RESPONSIBLE FOR REPLACING DECALS THAT HAVE BEEN DAMAGED DURING APPLICATION.

Football Wall Mural

Football Wall 2

NEW License Plates!

Baseball Wall Mural

Poker Room Wall Art


Fun Decals

Card Caddie

Custom Decals


POPULAR DECALS


Mascot Decals


Nascar Decals


Do It Yourself Desiging


Hunting Decals


Football Teams
  & Sports Decals


Kids Wall Decals



Tribal Decals

Wall Wording